Agregar pppoe uso de trafico a sistema de facturacion mikrotik

Mikrotik

https://www.youtube.com/watch?v=rwjtRLQjMjA

We are looking for an experienced developer to integrate PPPoE (Point-to-Point Protocol over Ethernet) functionality into our existing billing system. The goal is to automate the disconnection process for clients using MikroTik routers based on their billing status.

PPoE Configuration: Implement and configure PPPoE on our billing system to facilitate automated disconnection for clients. MikroTik Integration: Work with MikroTik’s API or other methods to ensure seamless communication between our billing system and MikroTik routers. Automated Disconnection: Develop a reliable mechanism to disconnect clients from the network when their billing status changes (e.g., overdue payments). Testing and Troubleshooting: Conduct thorough testing to ensure functionality works as expected and resolve any issues that arise during the implementation. Documentation: Provide clear documentation of the implementation process and any configurations made for future reference.

i have a Mikrotik router ether 1 (pppoe user)static ip also proxy 103.45.35.45 port 2525,4545,3535

i want ether2 (pppoe user )dynimc ip 103.45.35.45 port 2525 use proxy then go to traffic ether 2 ether3 (pppoe user )dynimc ip 103.45.35.45 port 4545 use proxy then go to traffic ether 3 ether4 (pppoe user )dynimc ip 103.45.35.45 port 3535 use proxy then go to traffic ether 4

We need a config for an rb5009 which runs on ethernet for pppoe services and using a pvc

the service is over a fttp from the carrier

pvc is 1/40 (this is the part we can not find how to do)

we are connected to sfpplus1

mikrotik Dears,